2019 Lamborghini Aventador SVJ specifications

CHASSIS AND BODY
FrameCarbon fiber monocoque with aluminum front and rear frames
BodyRemovable carbon fiber engine bonnet; fixed side air inlets; fixed rear spoiler with integrated ALA 2.0 System and Aero Vectoring System. Aluminum front bonnet, front fenders and doors; SMC rear fender and rocker covers with increased air inlets. New front and rear lightweight bumpers. New Front diffuser with integrated ALA 2.0 System. High pressure RTM carbon fiber hard top, painted or in visible carbon fiber.
Suspension typePush rod magneto-rheological active front and rear suspension with horizontal dampers and springs.
Suspension geometryAluminum double wishbone fully independent front and rear suspension.
ESPESC/ ABS Bosch 8.0 with different ESC characteristics, managed by drive select mode.
BrakesDual hydraulic circuit brake system with vacuum brake booster. CCB with 6-cylinder brake calipers at the front and 4-cylinder brake calipers at the rear.
Ventilated discs (front – rear)Carbon ceramic brake discs
(Ø 400 x 38 mm – Ø 380 x 38 mm)
SteeringHydraulic assisted power steering with three different servotronic characteristics, coupled with Lamborghini Dynamic Steering (LDS) and Lamborghini Rear-wheel Steering (LRS), managed by drive select mode
Steering wheel ratio10:1 – 18:1
Steering wheel turns lock to lock2.1 – 2.4
Steering wheel diameter358 mm
Tires (front – rear)New Pirelli P Zero Corsa 255/30 ZR20 – 355/25 ZR21
Wheels (front – rear)9”JX20” H2 ET 32.2 – 13” JX21”H2 ET 66.7
Kerb-to-kerb turning circle11.5 m (37.73 ft.) – average value, variable due to dynamic condition, thanks to LRS
MirrorsExternal mirrors heated, electrically adjustable and foldable
Rear spoilerFixed spoiler with integrated ALA 2.0 System and Aero Vectoring System
AirbagsFront dual stage driver airbag and front adaptive passenger airbag; seats with side “head-thorax” airbags; passenger and driver knee airbags in selected markets
  
ENGINE 
TypeV12, 60°, MPI
Displacement6,498 cc (396.5 cu. ln)
Bore and strokeØ 95 mm x 76.4 mm (3.74 in. x 3 in.)
Valve per cylinder4
Valve gearVariable valve timing electronically controlled
Compression ratio11.8 ± 0.2
Maximum power770 hp (566 kW) at 8,500 rpm
Specific Power output118.5 hp/l (87.1 kW/l)
Maximum torque720 Nm at 6,750 rpm
Engine speed, maximum8,700 rpm
Power to weight ratio2.05 kg/hp
Emission classEURO 6 – LEV 3
Emission control systemCatalytic converters with lambda sensors
Cooling systemWater and oil cross flow cooling system with variable air inlets
Engine management systemLamborghini Iniezione Elettronica (LIE) with Ion current analysis
Lubrication systemDry sump
  
DRIVETRAIN 
Type of transmission4WD with Haldex generation IV
Gearbox7 speed ISR, shifting characteristic depending on drive select mode
StandardAMT
1st gear ratio3.909
2nd gear ratio2.438
3rd gear ratio1.81
4th gear ratio1.458
5th gear ratio1.185
6th gear ratio0.967
7th gear ratio0.844
Reverse ratio2.929
Final drive ratio (rear – front2.867 – 3.273
ClutchDry double plate clutch, Ø 235 mm (9.25 in.)
  
PERFORMANCE 
Top speed> 350 km/h (> 217 mph)
Acceleration 0-100 km/h2.9 sec.
[0-62 mph]
Acceleration 0-200 km/h8.8 sec.
[0-124 mph]
Braking 100-0 km/h31 m
[62-0 mph]
  
DIMENSIONS AND WEIGHT
Wheelbase2,700 mm (106.30 in.)
Overall length4,943 mm (194.61 in.)
Overall width2,098 mm (82.60 in.)/
(excluding/including mirrors)2,273 mm (89.49 in.)
Overall height1,136 mm (44.72 in.)
Track (front – rear)1,720 mm (67.71 in) – 1,680 mm (66.14 in.)
Ground clearance115 ± 2 mm (front with lifting 155 mm)
(standard – lifting)
Dry weight1,575 kg (3,472 lb)
Total weight permitted2,100 kg (4.630 lb)
Weight distribution43% – 57%
(front – rear)
  
CAPACITIES 
Fuel tank85 liters
Engine oil13 liters
Engine coolant25 liters
Luggage compartment140 liters
CONSUMPTIONWLTP cycle